Electronics for Marine Navigation

Navigating on the open water away from land has always been challenging and very exciting. Boating can be a very rewarding experience if your vessel features the required tools to provide the complete safety. Good quality sea-navigation electronic equipment on board aids faster and safer boating.

 

It is recommended to make sure that, the boat is equipped with certain marine electronics. The minimum requirement for safety is to at least have a VHF Marine Radio and a compass before leaving the shore. Other recommended electronics include a GPS plotter, fish finder or depth sounder, radar, and auto pilot. Other more sophisticated but nice to have items include an Automatic Identification System and a networked navigation system

 

Marine navigation electronics equipment operation and uses are discussed below:

 

Auto Pilot: It is a highly recommended tool for mariners set to go on a long voyage. Auto Pilot helps to steer the boat automatically and thus, relieves the person at the helm from fatigue. Auto Pilot is of great help for those that troll while fishing as it controls the boat direction automatically, relieving the captain to join and enjoy the fishing. This tool is very helpful, as it allows to save fuel by keeping the vessel on a steady heading.

 

Fish finder: Those who fish for pleasure or hire enjoy the help provided by a good fish finder. The fish finder operates using SONAR. In principle, the sonar works by transmittig a signal down trough the water column until it strikes an object with mass, sufficent to return a signal to the device, thus drawing an image on the screen. Thereby, showing the fish depth relative to bottom structure. If a fish finder is not desired or needed then a depth sounder with a digital readout is ample and less expensive.

 

Automatic Identification System: It is considered an important electronic tool for marine navigation. It provides other boats with your vital information as well as their information to you such as the exact position of the boat, longitude and latitude, Time stamp, Rate of turn, Course over ground etc. While the vessel is on its way, the AIS presents the relevant data every 2 to 10 seconds, whereas when the vessel is anchored, the information is availabe approximately every 3 minutes. Apart from providing the mentioned info, it also provides useful information about nearby boats : their dimensions, location, and type of the [veselboat]. It is the ultimate electronic tool for collision avoidance at sea.

 

EPIRB: The Emergency Position Indicating Radio Beacon (EPIRB) also known as distress radio beacon is a transmitter, which helps rescue services to locate boats in distress. The transmissions are repeatedly transmitted from satellites worldwide to the various rescue services. Watercraft operators wishing to have an EPIRB must now use a digital 406MHz unit. The International Copas-Sarsat Satellite System stopped monitoring for all but 406MHz signals for distress alert and position data for rescue all over the world..

 

GPS Plotter: The GPS system now takes over the duty of the old Loran navigation system. GPS signals are broadcast from satellites all over the world that are maintained by the US government. GPS can be read in digital or map format. The preferred method is on a plotter that is loaded with digital maps of the area you are boating in. Most new VHF radios now have the capability to broadcast your location with a distress signal if connected to a GPS

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • Webnews
  • MisterWong
  • Y!GG

1 comment to Electronics for Marine Navigation

You must be logged in to post a comment.